Lamella LT

The Lamella® lamella separator was developed by the Axel Johnson Institute in Sweden during the 1970s and has become a world leader in lamella technology. Lamella separators are designed to maximise sedimentation in the smallest possible space. Lamella’s popularity is due to several factors; one of the most important being the well-proven design that contributes to the excellent safety and reliability that characterises Lamella.

Meva Multi Rake Screen MRS

The Meva MRS multi rake screen is a mechanically cleaned screen suitable for inlet channels of waste water treatment plants, pumping stations and process industries. The screen captures solid materials in water, which otherwise would be harmful to downstream equipment. You can use the Meva MRS both as a coarse screen and a fine screen with a slot width as low as 5 mm. Whatever the application, you get a robust design with low maintenance requirements.

Meva Rotoscreen RS

The Meva Rotoscreen is a self-cleaning fine screen for the separation of solid particles from water. The screen has a very low flow resistance that provides a low head loss and the highest relative capacity of all screen types on the market, which is an advantage for open-channel installation.


The Meva SRS external sludge receiver is used for receiving and mechanical pre-treatment of sludge from tanker trucks. The external sludge receiver consists of a Meva Rotoscreen and a Meva SWP screw wash press. The Meva Rotoscreen is resistant to grease, rags and sand making it particularly well suited for external sludge reception. The facility can also be supplied with an automatic or manual sand trap. We can also install a hand-cleaned overflow screen as an option. The result is a flexible and efficient solution with high reliability.

Zickert Z2000

The Z2000 Bottom Sludge Scraper is designed to provide continuous sludge transportation and performs well in all sedimentation processes, even in a sand trap. The Z2000 can be adapted to the most varied requirements because it is not dependent on where the operation is located and there is a choice between a hydraulic drive and an electric motor. The Z2000 also acts as a thickener.

Zickert Z3900

The Z3900 Surface Sludge Scraper is designed to remove surface sludge efficiently without taking away unnecessary transport water. It can be used in most applications where surface sludge occurs, both in municipal treatment plants and in industrial processes. It is easily adapted for tanks equipped for flotation or with lamella.

Meva MCU

The Meva combi-unit MCU can be used for the mechanical pre-treatment of municipal and industrial waste water. All treatment steps are integrated and performed in the same steel container. The Meva MCU is supplied in sizes from 10 l/s to 300 l/s. The combi-unit consists of the well known and proven Meva products Meva Rotoscreen, Meva Monoscreen and screw wash press (SWP).

Sobye Belt filter TD

With our Sobye filter you get an automatic, self-cleaning belt filter that removes particles from water in a cost-effective and space-efficient way. The Sobye filter replaces the standard primary filtration of municipal waste water and sedimentation processes, but on a much smaller area. Due to its effectiveness, it offers an investment saving of up to 50%. The Sobye filter is also used successfully in fish farming and fish processing. Further advantages are that the system delivers an extremely dry sludge and chemicals are normally not required, which facilitates the further treatment or processing of recoverable material.

DynaSand WWR

DynaSand WWR can be used for final polishing in the final step of the purification of waste water. Due to continuous washing the DynaSand filter can purify waste water with high concentrations of particles, so that you get about 3-4 times higher capacity compared to backwashed sand filters. Washing of the filter media is adapted to load and flow.

DynaSand eVo

DynaSand EVO is a further development of DynaSand filter technology and is particularly suitable when cleaning water with low turbidity, such as ground water treatment and carbon filter installations. The filter sand is washed with water from a nearby filter or supplied via a conduit. Unlike continuous contact filtration no water is produced while washing the sand and like the conventional backwashing filter the sand bed is stationary during filtration. You can combine DynaSand eVo with contact filtration and can always switch to continuous filtration if necessary.
This makes DynaSand eVo optimal to use for groundwater cleaning and untreated water with low turbidity and colour.